Services
Disinfection and Sanitizing in San Francisco
Scheduled and on-request disinfection for the door pulls, counters, restrooms and shared equipment that see the most hands in San Francisco offices, hotels, schools and shops.
A city of shared handles and crowded lobbies
San Francisco packs a lot of people into shared space. A big convention week fills hotel lobbies, restaurant counters and office elevator banks with visitors, and a single downtown tower can send its whole workforce through one ground-floor lobby and one bank of elevators before the first meeting of the day.
Sanitizing and disinfection target the surfaces all that traffic touches. San Francisco Cleaning Co adds this work to recurring service for the rooms you pick, or sends a crew for a single pass when an event, a move-in or a busy season calls for one. Either way, you get a written touchpoint list built for your building and a crew that works through it the same way every time.
Soil comes off before any disinfectant goes on
A disinfectant can only work on a surface it can actually reach. Fingerprints, food film and dust form a layer that blocks it, so our crews lift that layer with a cleaner matched to the material and a fresh cloth before the disinfecting step begins.
Next the product goes on and stays wet for the full dwell time its manufacturer specifies, instead of being wiped away straight after it is sprayed. Break-room tables and counters get a sanitizer once they are clean, while restroom fixtures and door hardware get a disinfectant, each chosen for the finish it will sit on.
Color-coded cloths and separate buckets keep restroom tools out of kitchens and break rooms, so nothing picked up in one room is carried into the next.
Touchpoint lists written for your type of building
Every building gets its own list, because hands land in different places. In an office we name door levers and push plates, elevator call buttons, light switches, conference tables and chair arms, shared phones, printer panels and the card readers at each entry.
Hotel public areas add front-desk counters, luggage carts, lobby seating and guest elevator buttons, timed around the check-in rush. Restaurants and cafés add host stands, payment terminals, restroom doors and the rails customers lean on while they order.
Classrooms bring desks, cubby edges, pencil sharpeners and drinking fountains, done once students have gone home. Warehouses and production buildings add time clocks, locker handles, vending machine buttons and the restroom doors every shift pushes open.
Coworking floors and shared meeting suites turn over their users several times a day, and gyms see the same churn at every machine, so their lists add chair backs, whiteboard markers and equipment grips.
Restrooms, break rooms and the finishes around them
Restrooms are on every disinfection visit, and restroom deep cleaning takes care of the grout and scale. Faucets, flush valves, stall latches, soap and towel dispensers, baby-changing stations and the inside pull of the exit door are all covered, along with the sink counters people set their phones on.
Break rooms come next: refrigerator, microwave and dishwasher handles, coffee brewer and water dispenser buttons, sink fixtures, chairs and tables. Shared equipment rounds out the list, from podiums and microphones in event spaces to the touchscreen at visitor check-in. Electronics are wiped with a dampened cloth rather than a direct spray, so screens and casings keep their finish.
Lobbies here run from polished stone and brushed stainless in newer towers to brass hardware, wood railings and terrazzo in older buildings downtown. A product that suits a laminate break-room table can dull marble or tarnish brass, so each finish on the list gets a product picked for it.
Those choices are written into the plan room by room, so a new crew member reaches for the same bottle on the same surface. If your building manager already approves products for lobby stone or elevator interiors, we work from that list instead.
Every visit, or when the calendar calls for it
On recurring service, the touchpoint list runs on every visit or on the nights you choose, with restrooms and break rooms always included. A day porter can repeat lobby and restroom touchpoints at midday, which suits towers and hotels where traffic peaks long before the evening crew arrives.
On-request visits cover moments that bring a crowd or a change: the week after a large conference, the first day back for a returning team, the start of a school term, or a suite handover between tenants. One crew covers the whole floor in a single pass, so the space starts fresh.
Medical practices can add terminal cleaning for the exam and procedure rooms they assign, following the facility’s own written sequence. Medical facility cleaning explains how those visits are planned around patients.
A routine that stays consistent
Each visit works from a checklist that names every touchpoint by room, so nothing rests on memory. After the first weeks of service we review the list with your contact and adjust it when a room changes use, a new kiosk goes in or a floor is reconfigured for a different team.
When tenants or staff ask what is covered, the written list answers that on a single page. It also makes it simple to add a room for a season, such as a lobby that hosts a holiday market or a conference floor booked for a busy quarter.
Rooms you want to drop for a while, such as a floor that sits empty over a holiday shutdown, come off the list just as easily and return when people do.
What sets the price for disinfection work
Disinfection is priced on the rooms and touchpoints in the plan and how often each one is covered. The number of restrooms, kitchens and break rooms, the amount of shared equipment, any midday porter repeats and evening or weekend timing all move the figure.
One-time visits are priced on the area covered and the hours available to work. A free walkthrough maps the surfaces that matter most in your building, and the written quote sets them out room by room, so you see exactly what each visit includes.
A few useful answers
Common questions.
Which rooms should get disinfection on every visit?
Restrooms and break rooms, plus entry doors and elevator buttons in any building with steady foot traffic. Quieter rooms such as storage and records areas can follow a lighter rotation.
Can you schedule a disinfection pass after a conference or large event?
Yes. Book a one-time visit for the night after the event or the next morning, and we cover the lobbies, restrooms, meeting rooms and touchpoints your guests used.
Do sanitizing and disinfecting use the same products?
No. Sanitizers go on clean surfaces such as break-room tables to bring down what is left after cleaning, while disinfectants are used on restroom fixtures and door hardware. Each product is chosen for the surface it touches.
How are touchscreens and shared electronics handled?
The product goes on a cloth rather than straight onto the device, and screens, keypads and casings are wiped gently so their coatings stay intact.
Can a day porter disinfect during business hours?
Yes. A porter can repeat lobby, elevator and restroom touchpoints in the middle of the day, between the evening crew’s full visits.
Services